Requirement
State what the complete solution must achieve for bulk presentation using magnetic-component separation and feeding, including your production pattern and who will review the result.
Component feeding and sortation
Magnet Feeding Systems Specification Checklist
Use this practical checklist to describe your requirements for magnet feeding systems around representative components, bulk condition and the downstream interface, line connections and required results.
A useful specification for magnet feeding systems describes your operating range, line connections and required results while leaving room for the supplier to propose the best method.
Use this checklist for bulk presentation using magnetic-component separation and feeding and separate confirmed facts, realistic ranges and items that need a trial.
On the production floor
Describe what the complete process needs to achieve — Magnet Feeding Systems
Plan magnet feeding systems around real component variation, bulk condition, orientation, usable delivery rate and the downstream interface. Discuss representative part trials with Sorting Solutions. A clear brief should state the operating range for component geometry and variation for magnetic-component separation & feeding and your requirements for jam, damage and recovery acceptance checks.
Discuss your application
Your checklist
Application, operation and results
Product, part or pack
Operation and interfaces
Results and support
Write measurable requirements
For Magnet Feeding Systems, turn each checklist item into a range and a test
Range
Record normal and credible extremes for component geometry and variation for magnetic-component separation & feeding, surface, fragility and entanglement behaviour and bulk condition and replenishment method; avoid relying on one nominal value.
Check
Define representative examples from bulk presentation using magnetic-component separation and feeding, the method, repetitions, acceptable range and result record so you and the supplier share the same expectation.
For magnet feeding systems, use “shall” only for a requirement that can be demonstrated. Keep preferences, assumptions, provisional line connections and future options clearly separate.
Connected responsibilities
Be clear about what sits around your magnet feeding systems
Your final magnet feeding systems scope must also account for escapement and downstream pick interface, jam, damage and recovery acceptance checks, current regulations and the conditions at your site.
- Sample trials must include normal, marginal and supplier-variant components.
- Quoted feeder output is not the same as usable delivery at the downstream process.
- Fragile, flexible, magnetic or entangling parts may need a different presentation method.